Author name: Gokul Dravid

The Stanton number (St) is a dimensionless parameter used in fluid mechanics and heat transfer to characterize the convective heat transfer rate in a fluid flow system. It represents the ratio of convective heat transfer to conductive heat transfer, similar to the Sherwood number for mass transfer. The Stanton number can be expressed mathematically as: […]

The Sherwood number (Sh) is a dimensionless parameter used in fluid mechanics and heat transfer to characterize the mass transfer rate in a fluid flow system. It represents the ratio of convective mass transfer to molecular diffusion, analogous to the Nusselt number for heat transfer. The Sherwood number can be expressed mathematically as, ​ Where:

The specific energy depth, also known as the critical depth, refers to the depth of flow in an open-channel system at which the total energy per unit weight of the fluid is minimized for a given discharge. This depth corresponds to a specific condition of flow where the kinetic energy and the potential energy of

The critical flow depth, also known as critical depth, is a significant concept in open-channel hydraulics, particularly in uniform flow conditions. It represents the depth of flow at which the specific energy of the flow is at a minimum for a given discharge. At this critical depth, the flow velocity is such that the Froude

Equivalent length in fluid mechanics refers to the concept of representing the combined effect of multiple fittings, bends, valves, or other obstructions in a piping system as an equivalent length of straight pipe. In some cases, minor losses are expressed in terms of an equivalent length of straight pipe that would cause the same head

Minor losses refer to the energy losses that occur in a fluid flow system due to various factors such as bends, fittings, expansions, contractions, valves, and other obstructions.  Here are some formulas related to minor losses: The loss coefficient, often denoted as K, quantifies the effect of a particular component or fitting on the head

The hydraulic radius (Rh​) is a fundamental parameter used in fluid mechanics, particularly in the analysis of open channel flow. It represents the ratio of the cross-sectional area (A) of the flow to the wetted perimeter (P) of the conduit. Mathematically, it is expressed as: ​ Where: Rh​ is the hydraulic radius, typically measured in

The hydraulic gradient is an essential concept in fluid mechanics, particularly in the field of hydrology and open channel flow. It represents the slope of the hydraulic head along a flow path and is crucial in understanding the flow of water in rivers, streams, and open conduits. The hydraulic gradient (i) is defined as the