Author name: Vedant Chaudhari

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This formula calculates the wall temperature of a hypersonic vehicle based on the freestream velocity and temperature. It is crucial for determining thermal loads and designing the thermal protection systems required for vehicles moving at hypersonic speeds. Symbols: Tw​: Wall temperature (K) Te​: Freestream temperature […]

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This formula calculates the ratio of specific heat in hypersonic flows. The specific heat ratio is a key parameter in a compressible flow, influencing shock wave behaviour and thermodynamic properties of gases at high speeds. Symbols: γ: Ratio of specific heats (dimensionless) Cp​: Specific heat

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This formula calculates the dynamic pressure in a hypersonic flow. Dynamic pressure is a key parameter in determining the aerodynamic forces on a body moving through a fluid, especially at high Mach numbers. Symbols: q1​: Dynamic pressure γ: Ratio of specific heats (dimensionless) p1​: Freestream

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This formula calculates the Stanton number in hypersonic flows, which is a measure of the heat transfer rate relative to the convective heat transport. It is a critical parameter in analysing thermal protection systems for hypersonic vehicles. Ch​: Stanton number (dimensionless) qw: Heat flux at

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This formula calculates the heat transfer rate to a surface in hypersonic flows, which is essential for understanding thermal loads on the surfaces of high-speed vehicles. High-speed flows generate significant heat due to air compression, and this equation helps in managing thermal protection. Symbols: q:

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This calculator evaluates the deflection angle for Prandtl-Meyer expansion waves in hypersonic flows. It uses an approximate relation, which becomes more accurate as the Mach numbers (M1 and M2​) increase. The formula helps determine the change in the direction of flow due to expansion, which is

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This calculator approximates the shock wave angle for slender wedges in hypersonic flow. For vehicles with sharp, slender geometries, understanding the shock wave angle is essential for predicting the location of shock waves and their effect on vehicle performance. This relation helps in designing hypersonic

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This calculator evaluates the pressure coefficient for hypersonic flow behind an oblique shock. The pressure coefficient is used to analyze pressure distribution around hypersonic vehicles, influencing drag, lift, and overall aerodynamic performance. Cp​: Pressure coefficient (dimensionless) γ: Ratio of specific heats (dimensionless) M1: Freestream Mach

– Hypersonic and High-Temperature Gas Dynamics, John D. Anderson, Jr. This calculator computes the velocity component perpendicular to the flow after a shock in hypersonic conditions. This component is key to predicting flow redirection and determining how shocks interact with the vehicle’s surfaces during high-speed flight. v2​: Velocity component perpendicular to the flow after the